Skip to content
Coaxial cables

RG 58 C/U

Construction and cross-section

RG 58 C/U is a thin coaxial cable with a characteristic impedance of 50 ohms: a center conductor of stranded tinned copper, a solid dielectric, a braided shield of tinned copper and a black jacket.

Key data

Characteristic impedance
50 Ω
Outer diameter
4.95 mmassumed
Layers
4
3D render: Three-quarter view of the stripped end – RG 58 coaxial cable with a black jacket, tinned braid, light insulation and a stranded conductor, in the photo studio for bare metal, print “Cable Creations”
Three-quarter view of the stripped end – RG 58 – in the photo studio for bare metalPicture: Cable Creations. Free to use with a link to this page as the credit.

Every cable is the answer to a task.

01Jacket
The construction

Layer by layer, to scale.

Short radio-frequency connections at 50 ohms, for example in radio, test and laboratory equipment. The thin construction makes the cable flexible; for long runs and high power, thicker types such as RG 213 are used.

4 layers

inside

  1. Tinned copper

    Ø 0.9 mmassumed

    19 wires of 0.18 mm each (assumed)

  2. Ø over this layer 2.94 mmassumed

  3. Tinned copper

    Single wire Ø 0.12 mmassumed

outsideØ 4.95 mm

“Assumed” means: the value does not come from a datasheet but is a usual value or one chosen from a reference.

Cross-section

To scale
Cross-section of a RG 58 C/U cable: all layers from the conductor to the jacket, to scaleØ 4.95 mm
Cross-section of RG 58 C/U, computed to scale from the construction data.Picture: Cable Creations. Free to use with a link to this page as the credit.
  1. Outer diameterassumed

    4.95 mm

  2. Dielectricassumed

    2.94 mm

  3. Center conductor, strandedassumed

    0.9 mm

Side view of a RG 58 C/U cable, stripped on the right down to the conductor
RG 58 C/U in side view.Picture: Cable Creations. Free to use with a link to this page as the credit.

To look for yourself, take it in your hand.

02Dielectric
The model

Turn, zoom, hide layers.

RG 58 C/U as a 3D model, from the same data as every picture on this page.

RG 58 C/U as a 3D model

Loads the model (0.1 MB)

3D model3D model · 114 kB

That leaves the question of what the jacket says.

03Center conductor
The name

What the name says.

“RG” stands for “Radio Guide” and comes from a US military designation system for radio-frequency cables. The number is a serial number: it says nothing about diameter or characteristic impedance. A letter after the number marks a version of the type, and the suffix “/U” marks general use.

RG 58 C/U has a stranded center conductor.

The printSchematic view of the jacket with the type designation.

Sources and assumptions

No datasheet was available for this type. The dimensions are the usual ones for RG 58 C/U and are therefore marked as assumed. The number of wires and the lay length of the braid were chosen from a reference picture.

Your whole range can look like this.

Pricing

Our prices are public.

See pricing

What each package includes, what an image costs as an extra, and how your cables get into the portal.